If motorcycle batteries are heading for a replacement, try Warehouse Battery Outlet in Danville, PA. The wholesaler specializes in all kinds of batteries. If it can hold a charge, the chances are that the Warehouse Battery Outlet has it in stock.
Four Tips and Tricks for Charging Motorcycle Batteries
The correct method to charge motorcycle batteries may not be immediately apparent, but most motorcycle owners only need to take a few small steps to figure things out. This short guide from Warehouse Battery Outlet covers the best ways to charge motorcycle batteries and keep those miles ticking over.
#1 Identify The Battery Type
Not every type of battery charges in the same way. Attempting to recharge incorrectly can easily lead to undesirable results. A motorcycle owner needs to first determine the type of battery before connecting it to any power outlets to charge.
Lead-acid batteries, gel batteries, and AGM batteries will accept a charge just like a car battery. However, lithium-ion batteries require proprietary charging parts, and these types are increasingly popular.
#2 Hope for the Best But Expect the Worst
Unfortunately, motorcycle batteries aren’t as flexible as other rechargeable options. Allowing a motorcycle’s battery to run completely empty might even run the risk of not accepting a new charge at all, especially if it’s been stationary for a while. Motorcycle owners with the proper tools might attempt to recharge a battery that’s died, but it is unlikely to return to its former state for any length of time.
If a battery has gone through repairs or recharges from empty, it is likely that the owner will need to purchase a new battery; the sooner, the better for motorcycle batteries.
#3 Use the Correct Charging Station
Motorcycles with a lithium battery usually come with a proprietary charging apparatus. However, motorcycle owners with other battery types may need to purchase their own.
Other motorcycle batteries typically come in three types from wholesalers like Warehouse Battery Outlet, including trickle chargers, float chargers, and smart chargers:
- All three types have the capability to recharge all non-lithium motorcycle batteries.
- Smart chargers are expensive but handle the charging process semi-autonomously.
- Many smart battery chargers also “desulfurize” the battery during the charging process as a bonus.
- Trickle chargers are straightforward, drawing power to the battery until the owner disconnects the charger.
- A float charger only stops when the battery reaches a full charge (a method that is less likely to cause permanent damage to temperamental motorcycle batteries).
#4 Motorcycle Batteries Need Ventilation
Charging a motorcycle battery may release harmful gases. Motorcycle owners should always be mindful of two things:
- Fully remove the battery from the motorcycle
- Charge it in a well-ventilated area
Motorcycle owners using trickle chargers should stop and “test” the state of charge periodically to minimize the chance of overcharging it. Float chargers and smart chargers don’t typically need this extra step.
Keep watch for potential issues that are causing battery drainage before rushing out to buy a new battery, as the motorcycle’s components may be causing additional problems. If the bike is in good repair and it is time for a replacement, call Warehouse Battery Outlet. The team is available at (570) 284-4186 today for all types of motorcycle batteries in the Danville or Quakertown, PA, area.
